Total Fire Protection

Thirteen (13) Things NOT to Do on A Service Call! Part 3

HVAC technician knocking on a customer's door while holding a box of equipment

Over the last few issues, we’ve covered the first seven of 13 things not to do on a service call. Again, these did not stem from theoretical situations; they actually happened on a service call performed by my plumber.  

We’ve covered a variety of issues, from the proper use of drop cloths to listening to customer requests. Now, we’ll go over the final six issues presented during my service call. 

Hint #8: All customers take note of how clean the tech equipment and the truck were  when the tech arrived. The final test, though, is how clear the area is when the tech  leaves. Most see a direct relationship, right or wrong, between how clean things are and  the quality of work performed. It may, or may not, be a true assumption, but if you  have not learned it already…perception is truth in the eyes of the customer.

Hint #9: Please either place the tool into a bucket, or bag, then onto a clean cloth or towel. Again, it shows respect for the customer’s home.

Hint #10: Purchase, and bring with you, a light that can be placed on the floor and moved, or angled, to shine on the needed work area.

Hint #11: Have an inventory of a variety of gaskets on the service truck. It’s not like gaskets are expensive or take up a lot of room.

Hint #12 – Bring your own towels and/or rags. Clean up after yourself before you leave. Remember, from the customers’ perspective, how clean the area is after the tech leaves is a direct reflection on the quality of work done. It may not be true… but  perception is truth to the homeowner.

Hint #13: Collect on the job before buyer’s remorse sets in. The real suggestion is to charge via flat rate pricing. That way, the customer knows the cost before the work is  done. Also, there would not have been any grumbling by the customer when the tech  needed to go back and get a part. The price would have been set. Best of all, the tech  could have collected right on the spot which would have helped cash flow.

From a functional standpoint, the technician did a great job. Before leaving, he flushed and adjusted each toilet multiple times, and he was very friendly. He was experienced, having worked for the company for over twenty years. Had he received a bit of customer service training, coupled with a few basic systems set up by the company, it would have been a great experience.

By the way, the total bill (which I received a couple weeks later) was a bit over $300. If the company has been on flat rate pricing, the tech could have simply told me up front, “Mr. Grandy, each toilet will be $100.”  I would have been happy with no concerns about his having to go pick up a gasket, and the job would have been completed without my wondering for two weeks how much it was going to cost.

Latest posts by Tom Grandy (see all)
Exit mobile version